How an Electrolytic Dissolved Air Flotation System Treats Oily Wastewater


Release Date:

2026-11-19

The dissolved air flotation system on this page is the Electrolytic air flotation unit from Master Technology (Wuxi) Co., Ltd. The page presents a compact DAF unit that uses electrolytic bubbles instead of a conventional air dissolving circuit. It lists four models, E1, E2, E5 and E10, with electrolytic capacities of 1, 2, 5 and 10 cubic meters per hour. The stated duty is pretreatment and advanced treatment of oily wastewater, including emulsions, high-salinity petrochemical effluent and surface treatment wastewater.

How the Electrolytic Bubble Works

The page says the separation comes from dissolved-gas and ionic-bubble generation technologies. The unit generates fine bubbles in an electrolytic cell, and those bubbles attach to oil droplets and suspended solids and lift them to the surface. The page also lists disruption, chain breaking, decolorization, deodorization and disinfection among the functions of the process. The electrolytic route is described as working without polymer consumption, which removes one chemical feed line and one operating cost.

Oil Removal and Effluent Quality

The headline claim on the page is an oil content in the effluent below 1 mg/L. The page also states a short hydraulic retention time and instant on and off operation. A short retention time means the unit reacts quickly when the influent changes, and instant on and off is useful when the flow is intermittent. We would still ask for a test on the actual effluent before sizing, because the result depends on the oil type, the salinity and the upstream pretreatment.

Models, Capacity and Footprint

The E series covers four sizes. The E1 has an electrolytic capacity of 1 cubic meter per hour and a footprint of 8 by 5 by 7 feet. The E2 doubles the capacity to 2 cubic meters per hour and measures 10 by 5 by 7 feet. The E5 is rated at 5 cubic meters per hour at 12 by 6 by 7 feet, and the E10 reaches 10 cubic meters per hour at 15 by 7 by 7 feet. The table also gives rated power and the recycling pump and compressor figures for each model. A buyer should confirm the electrical data and the unit of the power figures against the local supply before the order.

Installation and Unattended Operation

The unit is described as a ready-to-use skid-mounted structure. That shape shortens the site work: the skid arrives assembled, and the plant connects the inlet, the outlet, the power and the drain. The page also says the unit can achieve unattended operation, which means the panel handles the normal cycle and the operator checks the oil layer, the sludge discharge and the electrodes on a schedule.

Where the Unit Fits in a Treatment Line

The application list covers oil and gas field wastewater, various emulsions, high-salinity petrochemical effluent, surface treatment such as electroplating, PCB manufacturing and acid pickling, pharmaceutical wastewater, textile dyeing and printing wastewater, and chemical industry wastewater. In most of these cases the unit works as pretreatment before a biological stage or as advanced treatment after it. The page does not claim drinking water duty for this model, so we would not place it in a potable water line without a separate review.

What to Confirm Before Ordering

Before a quotation, a buyer should confirm the influent flow and its peak, the oil concentration and the oil type, the salinity, the temperature and the discharge target. It also helps to send the existing treatment train and the available footprint, because the four models differ in length from 8 to 15 feet. The buyer should ask for the P and I drawing, the electrode material, the sludge handling method and the commissioning scope. A sample test on site or in the factory is the practical way to check the oil removal result before a full order.

About the Manufacturer

Master Technology (Wuxi) Co., Ltd. is based at Shuofang Industrial Park, Wuxi High-Tech Industrial Development Zone, China. The contact numbers on the page are +86-510-85300777 and +86-510-85300555, with pre-sales at krofta@mstwater.com and after-sales at service1@mstwater.com. The company also presents shallow-ion air flotation, high-speed ion flotation, advection ion air flotation and a micro-oxidation dissolved gas system, so a buyer can compare more than one flotation route for the same water.

The dissolved air flotation system is a compact answer to a common problem: oily water that is too stable for a simple separator and too costly for a large chemical DAF. The E series gives four capacities from 1 to 10 cubic meters per hour, a skid-mounted build and a stated effluent oil level below 1 mg/L. A buyer who checks the influent data, the power supply and the service plan against the drawings can place the unit in the line with fewer surprises.


Previous

Next

Previous page:

Next page:

Copyright © 2026 Master Technology (Wuxi) Co., Ltd.

Business License